Parker Portable Magnetic Inspection Units

DA-750

DA-750 Heavy Duty High Amp Portable Magnetic Inspection Unit

The Parker Research DA-750 heavy duty portable magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. Field selection is determined by using the appropriate field cable connector.

Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length. AC magnetic fields offer the best sensitivity for detection of surface defect indications.

750 AMP OUTPUT: Operates from either 115 VAC, 1P or 230 VAC, 1P (must be specified.) The AC field is also beneficial for demagnetizing after inspection.

Half-Wave DC magnetic fields provide for the detection of certain subsurface defect indications. DC fields penetrate a cross section of the test area rather than just the surface. Optional magnetizing cables can be equipped with prods for circular magnetization. The cables can be wrapped around parts to form a coil for longitudinal magnetization. Demagnetization is accomplished in a similar manner.

DA-1500 Heavy Duty High Amp Portable Magnetic Inspection Unit

The Parker Research DA-1500 portable heavy duty magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. Field selection is determined by using the appropriate field cable connector. Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length.

AC magnetic fields offer the best sensitivity for detection of surface defect indications. The AC field is also beneficial for demagnetizing after inspection.
1500 AMP OUTPUT: Operates from either 230 VAC or 460 VAC, 1P (must be specified.)

Half-Wave DC magnetic fields provide for the detection of certain subsurface defect indications. DC fields penetrate a cross section of the test area rather than just the surface. Optional magnetizing cables can be equipped with prods for circular magnetization. The cables can be wrapped around parts to form a coil for longitudinal magnetization. Demagnetization is accomplished in a similar manner.

 

Model DA-750

Model DA-1500

Length 17 1/2″ (44.5 cm) 21 5/32 ” (54.9 cm)
Width 9 1/16″ (23 cm) 9 11/32″ (23.7 cm)
Height 7 13/16″ (19.8 cm) 9 17/32″ (24.2 cm)

Maximum output current ratings
based on the use of two 15-foot
lengths of 4/0 cable

750 amps, AC or HWDC 1500 amps, AC or HWDC
Line Voltage
single phase
115 VAC, 50/60 Hz;
230 VAC, 50/60 Hz
230 VAC, 50/60 Hz;
460 VAC, 50/60 Hz
Line current 26 amps @ 115 VAC;
13 amps @ 230 VAC
45 amps @ 230 VAC;
23 amps @ 460 VAC
Maximum duty cycle 2 minutes ON
2 minutes OFF
2 minutes ON
2 minutes OFF

Unit weight

35 lbs. (15.9 kg) 93 lbs. (42.2 kg)

 

Back to Magnetic Particle Equipment

Website by Corridor Design