Parker BAC-310 Battery/Inverter Power Supply

BAC-310

BAC-310 Battery/Inverter Power Supply

The BAC-310 battery-operated Power Supply is a totally portable, stand-alone 115 VAC power source for operating Parker and other A.C. Yokes.

The BAC-310 operates independently from any outside power source. Power is derived from the internal 12 VDC battery, which is inverted to 115 VAC output through the inverter circuitry. A separate battery charger is provided for overnight charging of the battery. The entire unit is contained within a heavy-duty steel case with dimensions 10¾” H × 7¼” W × 13¼” D and weighs only 30 pounds. The unit may be used in any shop or field application and is ideal in areas where normal A.C. line power is not available or where outside power sources may present a safety concern.

Plug any of the Parker A.C. series Contour Probes (Yokes) into the A.C. outlet. There is nothing else to do. The Contour Probes will function as they would normally from any other A.C. power source. Follow operating instructions for the individual Probe for correct and normal A.C. Yoke inspection techniques and requirements.

All Parker Contour Probes (Yokes) exceed applicable Magnetic Particle specification requirements.

bac310fig

SPECIFICATIONS

BAC-310 AC Power Supply Assembly

Dedicated use Any A.C. Probes 
Current draw 6A (B-300) 
Approximate running time 2 hr 
Total weight 30 lb (13.6 Kg)

BAC-310-600 Inverter

Maximum continuous power 1000 W
Surge capacity (peak power) 2000 W
Maximum efficiency Approx. 90% 
No load current draw 0.8 A 
Low voltage shutdown activation 10.0 V 
Low voltage alarm activation 10.6 V 
Wave form Modified sine wave 
Weight 4.25 lb (1.9 Kg) 

BP-20 Battery Pack

Type Rechargeable sealed lead acid 
Rating 12 V. 20 Ah / 20 hr
Fuse 35 A Maxi type
Weight 14.3 lb (6.5 Kg) 

BC-310 Charger

Type Fully automatic 
Input 115 VAC 
Output 12 VDC, 1.5 A
Weight 1.9 lb (0.87 Kg) 

Back to Magnetic Particle Equipment

Website by Corridor Design